
Reuse waste ink tank1) Remove Maintenance tank.
2) Use a small flathead screwdriver, pry top off the Maintenance tank.

3) Remove top from the Maintenance tank and throw away the old ink-soaked pads.

4) Fold several paper towels or some cotton balls to fit in the bottom of the tank
filling the tank about 1/2 way (shown below). Then fold a paper towel on top of others.
Note: Maintenance tank will only be reset when it gets full. Since you keep resetting and using the same maintenance tank, you need to modify this tank as shown following.Refer to :
http://www.inkrepublic.com/knowledgebas ... ll-faq.asp